roof chimney repair

Licensed chimney masons for leaks, flashing, crowns and brick

Roof chimney repair in Randolph Town done right the first time

When water stains the ceiling around your flue, you need roof chimney repair in Randolph Town that actually finds the source. We handle chimney roof leak repair Randolph Town homeowners call about every fall: failed flashing, cracked crowns, spalled brick and worn mortar joints. Our crews work on Randolph's older masonry chimneys and newer stainless-lined flues alike, and we leave the roof watertight.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the repairScope and price explained upfront

What's included

What our roof chimney repair includes

Every roof chimney repair we do includes a full inspection, the repair work itself, and a water test before we leave. Here is what is covered in a standard job, and what we quote separately if your chimney needs it.

01

Full roof-line inspection

We inspect the flashing, counter-flashing, crown, cap, damper and accessible mortar joints. You get photos of anything we find. This takes 45 to 60 minutes and is included in every repair quote.

02

Flashing repair or replacement

We remove failed flashing, cut in new copper or aluminum, and step it into the roof and masonry to code. This is the most common fix for chimney roof leaks and is included in most repair scopes.

03

Crown repair or rebuild

Cracked crowns get rebuilt with chimney crown mix and proper overhang. Small cracks can sometimes be sealed. We tell you which option your crown actually needs, and price both if it is close.

04

Mortar and brick repair

We repoint joints with tuckpointing mortar and replace spalled brick where needed. We match the original mortar color and joint profile so the repair does not stand out against the rest of the chimney.

05

Waterproofing and cap check

After repairs, we apply breathable water repellent to the brick and check the cap and damper. If the cap is damaged, we quote a replacement. Waterproofing is included; new caps are quoted separately.

06

Water test and cleanup

We run water over the chimney from the roof and watch from inside before we pack up. Drop cloths go down before we start and a HEPA vacuum runs at the end. You should not find dust or debris after we leave.

Service overview

What roof chimney repair in Randolph Town involves

Roof chimney repair in Randolph Town means fixing the places where a chimney meets the roof and weather gets in: the flashing, the crown, the mortar joints, the brick itself and the cap. We start with a camera inspection system and a hands-on look at the roof line, then repair what is actually failing instead of selling a whole rebuild. Most jobs involve new flashing, a poured or rebuilt crown, tuckpointing with refractory mortar, and a stainless steel liner check before we close up.

Randolph Town sits in a freeze-thaw belt that punishes masonry. Water soaks into brick in November, freezes overnight, and pops the face off by March. That cycle is why chimney crown cracking and chimney mortar falling apart show up on so many local homes. If you have been searching for chimney roof leak repair Randolph Town Massachusetts, the leak is usually one of four things: flashing, crown, cap or liner. We identify which one before we quote.

Leak found first timeWe pressure-test the flashing, crown and cap before quoting, so you are not paying twice for the same leak. Most chimney roof leak repair Randolph Town jobs are traced to a single failed component, and we replace that component, not the whole chimney. You get a written scope and a fixed price before we start.
Masonry that survives winterWe rebuild crowns with chimney crown mix, repoint with tuckpointing mortar, and seal brick with a breathable water repellent. That combination handles the freeze-thaw cycle that cracks Randolph chimneys every year. A properly sealed chimney can go 8 to 12 years before it needs another waterproofing coat.
Code-correct flashingFlashing is where 6 out of 10 chimney leaks start. We cut in new copper or aluminum flashing, step it into the roof courses, and counter-flash into the masonry per IRC chimney code and NFPA 211. Done right, flashing outlasts the shingles around it. Done wrong, it leaks again after the first hard rain.
FixoraPoint serving Randolph Town, Massachusetts
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How our roof chimney repair process works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Phone triage

We ask where the water shows up: ceiling stain, attic drip, damper rust or a wet firebox. That tells us whether it is a flashing leak, a crown crack or a liner problem before we arrive. You get a two-hour arrival window and a call when the tech is en route. Most calls are answered in under a minute.

Stage 1
02

Roof and flue inspection

On site, we run a camera inspection system down the flue and inspect the roof from the ridge. We check flashing, counter-flashing, the crown, the cap, the damper and every mortar joint within reach. This takes 45 to 60 minutes and you get photos of everything we find.

Stage 2
03

Written scope and price

You get a written scope with the exact repairs, materials and price. If the chimney needs tuckpointing plus a new crown, that is two line items, not a vague rebuild quote. We explain what can wait and what cannot. You decide, we schedule.

Stage 3
04

Repair day

We lay drop cloths inside, set ladders and roof anchors outside, and get to work. Flashing gets cut in first, then crown, then mortar joints, then cap and waterproofing. Most roof chimney repairs take four to eight hours. We HEPA vacuum the firebox and hearth before we leave.

Stage 4
05

Water test and walk-through

Before packing up, we run water over the chimney from the roof and watch the flue and ceiling from inside. If a drop shows up, we find it then, not after the next storm. You get a written summary of what was repaired and what to watch for next season.

Stage 5

Tools & methods

Tools and methods we use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Camera inspection system

Lets us see inside the flue without guessing. We use it to check for liner cracks, blockages and creosote glaze before recommending any repair.

02

Chimney brush and rods

Used for cleaning the flue and smoke chamber. We size the brush to the flue so we get full contact without damaging the liner.

03

Mortar jointer and tuckpointing trowel

These shape the new mortar joint to match the original profile. The right joint profile is what keeps water from sitting on the mortar and eroding it.

04

Grinder with diamond blade

We use it to cut out old mortar to the correct depth before repointing. A clean cut is what makes tuckpointing last instead of flaking off.

05

HEPA vacuum and drop cloths

Keeps dust out of your living space. We set drop cloths before we start and vacuum the firebox, hearth and surrounding area before we leave.

06

Masonry drill

Used for anchoring flashing, installing caps and setting masonry ties. We drill clean holes and seal them so they do not become new leak points.

Use cases

When to call for roof chimney repair

These examples show how the service framework adapts rather than forcing every call through one repair.

roof chimney repair
Flashing leak stopped on a Randolph Center colonialThe homeowner had a ceiling stain that grew every time it rained hard. Two prior contractors had caulked the flashing and called it fixed. The leak came back within a month, and the stain had spread to two ceiling bays. → We removed the old caulk and failed step flashing, cut in new copper flashing stepped into the roof courses, and counter-flashed into the masonry. Water test passed on the first try. The ceiling stain stopped growing, and the repair has held through two winters.

Crown rebuild and tuckpointing in Downtown Randolph

A 1930s brick chimney had a crown cracked in three places and mortar missing from roughly 40 percent of the joints. Brick was spalling on the south face, and material was landing on the roof after every freeze. → We rebuilt the crown with chimney crown mix and correct overhang, tuckpointed 60 square feet of joint work with matched mortar, replaced 14 spalled brick, and waterproofed the stack. The chimney stopped shedding material and matched the original appearance.

Storm-damaged cap and flashing in Randolph Hills

A nor'easter tore the chimney cap loose and lifted the flashing on one side. Rain was running straight down the flue and rusting the damper. The homeowner called on a Saturday with water in the firebox. → We tarped the chimney the same day, returned Sunday morning with a new stainless cap and flashing materials, and had the repair finished by early afternoon. The damper was cleaned and freed, and a water test confirmed no leaks. Total time from call to finished repair was under 24 hours.

Problems we solve

Chimney problems we fix in Randolph Town

Most chimney leaks come down to a handful of failures. Here are the ones we see most often on Randolph Town roofs, and what happens if you leave them alone.

ISSUE

Chimney flashing leak at the roof line

We remove the failed flashing, cut in new copper or aluminum, and step it into the roof courses and masonry per IRC chimney code. Then we water-test from the roof while watching from inside. Most flashing repairs finish in three to four hours.

SYMPTOM

Chimney crown cracking and spalling brick

We rebuild the crown with chimney crown mix and correct overhang, replace spalled brick, and seal the stack with breathable water repellent. This stops the water cycle that causes spalling in the first place. Most crown rebuilds take a full day.

SIGN

Chimney mortar falling apart

We grind out the old joints and repack them with tuckpointing mortar matched to the original. Tuckpointing costs a fraction of a rebuild and adds 15 to 25 years to a chimney that is otherwise sound. We quote by square foot of joint work.

ALERT

Chimney cap damage and animal entry

We install stainless or copper caps sized to your flue and screened to keep animals out. Installation usually takes under an hour. It is the cheapest repair that prevents the most expensive damage.

Pricing process

What roof chimney repair costs

$350 - $1,800 for most repairs; $1,500 - $3,500 if a new liner is needed

Phase 01

What is actually failing

Flashing repair alone is the cheapest fix, usually $350 to $700. A crown rebuild runs $600 to $1,200. Tuckpointing adds $8 to $15 per square foot of joint work. The more components that have failed, the higher the total.

Phase 02

Chimney height and roof pitch

A tall chimney on a steep roof takes more setup, more safety gear and more time. We use roof anchors and OSHA 10 procedures on every job, and that setup is part of the price.

Phase 03

Brick and mortar matching

Matching original brick and mortar on an older Randolph chimney takes more time than using stock materials. We match the profile so the repair blends in, which matters on visible chimneys.

Questions before we arrive

Frequently Asked Questions

roof chimney repair
Call (844) 803-2151
How much does roof chimney repair cost in Randolph Town Massachusetts?

Most roof chimney repairs in Randolph Town run $350 to $1,800 in 2026, depending on what is failing. Flashing replacement alone is typically $350 to $700. A crown rebuild runs $600 to $1,200. Tuckpointing adds $8 to $15 per square foot of joint work. If the liner is also damaged, expect $1,500 to $3,500 for a stainless steel liner. We give you a written price before any work starts.

Can a chimney roof leak be repaired in Randolph Town?

Yes, and most chimney roof leaks can be repaired in a single visit. The key is finding the actual source: flashing, crown, cap, mortar joints or liner. We pressure-test the chimney with water from the roof while watching from inside, so we know exactly where the leak is entering. Once identified, the repair is usually straightforward and can be done the same day.

What causes chimney roof leaks in Randolph Town Massachusetts?

The four most common causes are failed flashing at the roof line, a cracked chimney crown, a damaged or missing chimney cap, and spalling brick that lets water soak into the masonry. Randolph's freeze-thaw winters make all four worse. Water enters a hairline crack in November, freezes, expands, and by spring the crack is a real leak. Annual inspection catches these before they turn into ceiling damage.

Who does roof chimney repair near me in Randolph Town?

FixoraPoint does. We are based in the area and serve every Randolph Town neighborhood, from Downtown Randolph to Randolph Hills and Randolph Estates. Call (844) 803-2151 and we can usually be on your roof the same day for an inspection. We handle flashing, crowns, caps, tuckpointing, liners and full chimney restoration, all with licensed and insured crews.

Ready when you are

Get your roof chimney repair in Randolph Town scheduled today

Water in your firebox or a stain on the ceiling means the leak is already active. Call (844) 803-2151 and we will get a licensed chimney mason on your roof, usually the same day. Written price before we start, and we water-test before we leave.

roof chimney repair

Talk with the local team

Request roof chimney repair

Call (844) 803-2151 or email [email protected] and tell us what your chimney is doing. We answer the phone 24/7 for emergencies and schedule routine repairs within the same week. If you are not sure whether you need a repair or just a sweep, we will tell you straight.

671 North St, Randolph, MA 02368, USA, Randolph Town, MassachusettsMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now