chimney liner repair

Licensed, code-correct relining for wood, gas, and oil flues

Chimney liner repair in Randolph Town, Massachusetts done right

When your flue is cracked, spalling, or pushing smoke back into the room, chimney liner repair in Randolph Town, Massachusetts is the fix that keeps the house safe and the fireplace usable. We reline wood, gas, and oil chimneys with stainless steel and cast-in-place systems, pull the required permits, and test draft before we leave. Whether you need chimney liner replacement Randolph Town or a targeted repair, we scope it honestly and price it upfront.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the repairScope and price explained upfront

What's included

What is included in chimney liner repair

Every liner job we do starts with a camera inspection and ends with a draft test. In between, we handle the parts that actually matter: the liner itself, the connections at the top and bottom, the smoke chamber, and the cap. Here is what is covered in a standard job.

01

Full camera inspection

We run a camera inspection system down the entire flue and photograph every joint and crack. You see the footage before we quote anything. This is how we know whether you need a repair or a full reline.

02

New stainless or cast-in-place liner

We install an insulated stainless steel liner sized to your appliance, or a cast-in-place liner for irregular flues. Both meet NFPA 211 and the Massachusetts building code for the appliance they serve.

03

Top and bottom connections

The liner only works if the ends are sealed. We set the top plate and storm collar at the crown and connect the bottom at the appliance or damper with refractory mortar. No gaps, no leaks.

04

Smoke chamber parging

The smoke chamber above the damper is where turbulence and creosote build up. We parge it smooth with refractory mortar so smoke moves up instead of rolling back into the room.

05

Cap and crown seal

We install a stainless chimney cap sized to the new liner and seal the crown with chimney crown mix. This keeps rain, animals, and debris out of the flue and stops water from getting into the masonry.

06

Draft test and cleanup

We run the appliance, check draft with a gauge, and confirm no smoke spills at any joint. Then we clean up with a HEPA vacuum and walk you through the work before we leave.

Service overview

What chimney liner repair in Randolph Town, Massachusetts involves

Chimney liner repair in Randolph Town, Massachusetts is the process of restoring the inner flue wall that carries smoke, carbon monoxide, and heat out of your home. On a masonry chimney, that means removing or resurfacing the damaged clay tile and installing a new stainless steel liner, or pouring a cast-in-place liner that bonds to the existing flue. We start with a camera inspection system to see the full run, then grind out failed mortar, rebuild the smoke chamber, and set the new liner with refractory mortar at the top and bottom connections.

Most calls we get in Randolph Town start the same way: a homeowner notices white staining on the brick, a smoky smell in the upstairs hallway, or a chimney sweep who flagged a cracked tile during a cleaning. The 2026 heating season is already here, so if you have been putting off chimney liner repair near me in Randolph Town Massachusetts searches, now is the time. A failed liner lets heat reach the framing and lets carbon monoxide into living space. We see it most in homes built before 1960 with original clay tile that has cracked from decades of freeze-thaw cycles.

Code-correct from day oneEvery liner we install meets NFPA 211 and the Massachusetts building code for the appliance it serves. That means the right insulation, the right clearance, and the right cap. If you ever sell the house, the inspection report will show a compliant flue instead of a flagged one.
Stops smoke and CO backupA cracked or oversized flue loses draft, so smoke rolls back into the room and carbon monoxide can follow. We size the new liner to the appliance, which restores draft and keeps exhaust moving up and out. Most customers notice the difference the first fire they light.
Protects the masonry around itHeat and moisture escaping through a failed liner break down firebrick and mortar from the inside. Relining stops that cycle. Pair it with chimney waterproofing and you can add years to the brick instead of watching it spall and crumble season after season.
FixoraPoint — Chimney repair you can rely on
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How our liner repair process works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Camera inspection

We run a camera inspection system down the full flue and photograph every joint, crack, and offset. You see the same footage we do. This is how we tell whether you need a spot repair or a full reline, and it takes about 30 minutes.

Stage 1
02

Written scope and price

We measure the flue, note the appliance type, and quote the job before any work starts. If the liner can be repaired instead of replaced, we say so. If a chimney liner replacement Randolph Town Massachusetts job is the only safe option, we show you why on the camera footage.

Stage 2
03

Prep and protection

Drop cloths go down, the work area gets sealed, and we set up a HEPA vacuum to keep dust out of the house. We pull the damper and any failed tile, then clean the flue with a chimney brush and rods before anything new goes in.

Stage 3
04

Liner installation

For stainless, we insulate the liner, drop it through the flue, and connect it at the appliance and the top with a proper cap and storm collar. For cast-in-place, we pour the mix and let it cure. Either way, the smoke chamber gets parged and the crown gets sealed.

Stage 4
05

Draft test and walkthrough

We light a test fire or run the appliance, check draft with a gauge, and confirm no smoke spills at the joints. Then we walk you through what we did, hand you the paperwork, and leave the work area cleaner than we found it.

Stage 5

Tools & methods

Tools and methods we use on liner jobs

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Camera inspection system

Lets us see the entire flue run and photograph every joint, crack, and offset. You see the same footage we do before we quote the job.

02

Chimney brush and rods

We sweep the flue clean before any liner goes in. Creosote and soot left behind will contaminate the new liner and hide damage we need to see.

03

Grinder with diamond blade

Used to cut out failed tile and trim the flue opening so the new liner fits with proper clearance. This is the loud part of the job.

04

Mortar jointer and tuckpointing trowel

For repointing exterior joints and parging the smoke chamber. The right trowel profile makes the mortar sit properly in the joint.

05

HEPA vacuum and drop cloths

Keeps soot and dust out of your living space. We seal the work area before we start and vacuum as we go.

06

Draft gauge

Confirms the new liner is pulling correctly before we call the job done. If draft is off, we find out on our time, not yours.

Use cases

When Randolph Town homeowners need liner work

These examples show how the service framework adapts rather than forcing every call through one repair.

chimney liner repair
1948 colonial with cracked tile flueThe homeowner had been fighting smoke backup for two winters and the upstairs hallway smelled like a campfire every time they lit the fireplace. A camera inspection showed four cracked tiles and a failed joint near the top of the flue. → We installed an insulated stainless steel liner sized to the fireplace, parged the smoke chamber, and set a new cap. Draft tested clean on the first fire. The smoke backup has not come back in two seasons.

Gas insert with oversized flue

The homeowner had a gas insert installed in a flue that was originally sized for wood. The insert sooted up within a month and the fireplace smelled like exhaust whenever it ran. The flue was roughly twice the size the appliance needed. → We sized and installed a new stainless liner to the insert's BTU output, insulated it, and connected it at the appliance and the top. The sooting stopped and the smell went away. Draft now reads where it should.

Leaking crown rotting the liner

White staining on the brick and water in the firebox after every storm. The crown had a hairline crack running across it, and water was running down the flue and freezing against the tile. Two tiles had already spalled. → We repoured the crown, sealed it, repaired the flashing, and relined the damaged section of flue. The leak stopped and the firebox stayed dry through the next spring's rain. The masonry has held up since.

Problems we solve

Liner problems we fix for Randolph Town homeowners

Most liner failures announce themselves before they become dangerous. Here are the ones we see most often in Randolph Town and what happens if you ignore them.

ISSUE

Cracked clay tile in an older flue

We run a camera inspection to map every crack, then install an insulated stainless steel liner sized to the appliance. The new liner handles the thermal cycling that cracked the tile in the first place, and we test draft before we leave.

SYMPTOM

Chimney liner damage from a chimney fire

We inspect the full flue after any chimney fire, document the damage, and reline if the tile is compromised. We also sweep out the creosote that caused it and check the damper and cap while we are up there.

SIGN

Oversized flue on a gas appliance

We size a new stainless liner to the appliance's BTU output and insulate it so it stays warm. This is one of the most common chimney liner replacement for gas fireplace Randolph Town Massachusetts jobs we do, and the fix is usually a one-day install.

ALERT

Chimney leak rotting the liner from outside

We trace the leak to its source, repair the crown or flashing, and reline the damaged section. Then we seal the masonry with water repellent so the same thing does not happen again next winter.

Pricing process

What chimney liner repair costs in Randolph Town

$450 - $5,500 depending on scope

Phase 01

Flue length and diameter

A taller chimney needs more liner, and a larger diameter costs more per foot. We measure the actual run during the inspection, so the quote reflects your chimney, not an average.

Phase 02

Liner material

Stainless steel is the standard for most jobs. Cast-in-place runs higher because of the mix, the formwork, and the second visit for the cure. We recommend based on the flue, not the price tag.

Phase 03

Appliance type

Wood, gas, and oil appliances need different liner specs and different insulation. A gas insert with a small BTU output takes a smaller liner than a wood fireplace, and the price reflects that.

Questions before we arrive

Frequently Asked Questions

chimney liner repair
Call (844) 803-2151
How much does chimney liner repair cost in Randolph Town Massachusetts?

Most chimney liner repair jobs in Randolph Town run $450 to $1,800, and a full stainless reline typically lands between $2,200 and $5,500 depending on flue length, liner diameter, and whether we are working with a wood, gas, or oil appliance. Cast-in-place liners run higher because of the pour and cure time. We quote the exact number after the camera inspection, before any work starts.

Can a chimney liner be repaired in Randolph Town, or does it always need replacement?

Yes, a liner can sometimes be repaired. Small cracks, isolated spalling, and failed mortar joints at the top of the flue can be patched with refractory mortar and a parge coat. But once more than about 20 percent of the tile run is compromised, or the flue serves a gas appliance, replacement is the code-correct call. We show you the camera footage and let you decide.

What is chimney liner replacement in Randolph Town Massachusetts, and how long does it take?

Chimney liner replacement in Randolph Town Massachusetts means removing the failed clay tile or old liner and installing a new stainless steel or cast-in-place liner sized to your appliance. A typical stainless install takes one day, roughly six to eight hours. Cast-in-place liners need a second visit for the cure and finish, so plan on two days.

Who does chimney liner repair near me in Randolph Town, and how fast can you get here?

We do, and we cover every neighborhood from Downtown Randolph to Randolph Woods. Standard appointments are usually booked within a few days, and same-day service is often available for no-heat emergencies. If your liner has failed and you are burning wood or running the furnace, call us at (844) 803-2151 and we will get a tech out fast.

Ready when you are

Book chimney liner repair in Randolph Town, Massachusetts today

If your flue is cracked, smoking, or flagged on an inspection, do not wait for the first cold snap. We are licensed, insured, and warrantied, and we quote the job before we start. Call (844) 803-2151 and we will get a tech on your roof.

chimney liner repair

Talk with the local team

Request chimney liner repair

Call (844) 803-2151 or email [email protected] and tell us what your chimney is doing. We answer the phone 24/7 for emergencies and schedule routine repairs within the same week. If you are not sure whether you need a repair or just a sweep, we will tell you straight.

671 North St, Randolph, MA 02368, USA, Randolph Town, MassachusettsMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now